Discussion GCE Issues - Rclone won't deploy

Assists Greatly with Development Costs

timmeh

Respected Member
Original poster
Local time
3:05 AM
Feb 14, 2019
82
18
PG Version
8.7.5
Mount Type
Blitz Unencrypted
I'm receiving the following error when setting up automated GCE:

2019/11/17 01:03:00 ERROR : Attempt 1/3 failed with 2 errors and: failed to make directory: googleapi: Error 404: File not found: 0AF69GaVKsGXHUk9PVA., notFound
2019/11/17 01:03:01 ERROR : Attempt 2/3 failed with 2 errors and: failed to make directory: googleapi: Error 404: File not found: 0AF69GaVKsGXHUk9PVA., notFound
2019/11/17 01:03:01 ERROR : Attempt 3/3 failed with 2 errors and: failed to make directory: googleapi: Error 404: File not found: 0AF69GaVKsGXHUk9PVA., notFound
2019/11/17 01:03:01 Failed to mkdir with 2 errors: last error was: failed to make directory: googleapi: Error 404: File not found: 0AF69GaVKsGXHUk9PVA., notFound
GDRIVE : Passed
TDRIVE : Passed
GDSA01 : Failed

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🚀 RClone Mount Checks - Failed
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

CANNOT DEPLOY!

POSSIBLE REASONS:
1. GSuite Account is no longer valid or suspended
2. Client ID and/or Secret are invalid and/or no longer exist


I have tried using MANY different keys, projects and emails and just can't seem to get this to work... any idea what may be going wrong?

Cheers,
TIMMEH
 

Armin

Senior Member
Staff
Local time
10:05 PM
Mar 28, 2018
188
50
you have API ban or your new keys not added to your share drive yet
 

timmeh

Respected Member
Original poster
Local time
3:05 AM
Feb 14, 2019
82
18
So, does an API make those keys redundant? Those same keys are working on my Hetzner and my Pi (with Rclone).
Or does an API ban make new API setup redundant?

It also means that I can't access the backup/restore function from my shared drive. Very frustrating. Any idea what may cause it?

Sorry for the questions, I just don't quite understand how it works.
 
Last edited:

Armin

Senior Member
Staff
Local time
10:05 PM
Mar 28, 2018
188
50
I assume on your new gc you went trough mount transport setup
so you just need to use option 7 to build the keys then add them to your share drive
so to answer your question you need new keys for every time you open new gc cause in option 1 and 2 in mount transport you add your new google account and new project name
 

timmeh

Respected Member
Original poster
Local time
3:05 AM
Feb 14, 2019
82
18
Cheers man, I'd not read the email share section properly and assumed it happened automatically.

All sorted. WHOOP!
Post automatically merged:

Another problem has reared its head. Downloads are getting stuck in /mnt/downloads/nzbget/tv/:

storage:
/............: 56G used, 153G free, 208G total
/boot/efi...... 3.8M used, 106M free, 110M total
/mnt........... 350G used, 26G free, 396G total
/mnt/unionfs... 770G used, 2.3P free, 2.3P total

Drives are mounted properly, as far as I can tell. Rclone is just not moving them across from the downloads directory...
 
Last edited:

Armin

Senior Member
Staff
Local time
10:05 PM
Mar 28, 2018
188
50
check your pgui and make sure all green
2019-11-18_1-50-55.png
if there is no issue there go to next step and test your rclone transport
sudo pg 4>1>s>s>a
after this you can see a test file in your gdrive.if you see the file that mean you have to look for your issue in sonnar or radarr and rclone is working ok
hope that help
 
  • Like
Reactions: timmeh

timmeh

Respected Member
Original poster
Local time
3:05 AM
Feb 14, 2019
82
18
All good in PGUI:

RClone | Mount Checks
PGUnion - RClone✅ Operational
GDrive - RClone✅ Operational
TDrive - RClone✅ Operational
PGUnion - Mount✅ Operational
GDrive - Mount✅ Operational
TDrive - Mount✅ Operational

Have looked at ARR but can't see anything obvious, mappings etc... all work OK. Although Radarr isn't connecting to NZBGET which is odd, but sonarr is.

I tried the test:

Allocating 4G test file...
Starting upload to gdrive...
Transferred: 4G / 4 GBytes, 100%, 48.011 MBytes/s, ETA 0s
Errors: 0
Checks: 0 / 0, -
Transferred: 1 / 1, 100%
Elapsed time: 1m25.3s

Upload complete, deleting local file...
Starting download from gdrive...
Transferred: 4G / 4 GBytes, 100%, 80.154 MBytes/s, ETA 0s
Errors: 0
Checks: 0 / 0, -
Transferred: 1 / 1, 100%
Elapsed time: 51.1s

Download complete, deleting remote file...

Looks like it's an ARR issue?
 

Armin

Senior Member
Staff
Local time
10:05 PM
Mar 28, 2018
188
50
reboot your server and deploy plitz again and try again see if that help
otherwise thats all of think of
 
  • Like
Reactions: timmeh

timmeh

Respected Member
Original poster
Local time
3:05 AM
Feb 14, 2019
82
18
Could it be a firewall issue? I remember during setup there was a query to 'allow HTTP and/or HTTPS connections' - I think I only allowed HTTPS. Is that likely to cause issues? I can't remember when it prompted me to answer that though
 
Assists Greatly with Development Costs

timmeh

Respected Member
Original poster
Local time
3:05 AM
Feb 14, 2019
82
18
Have checked and there's already a 'plexguide' rule with those settings...
Post automatically merged:

Error message from both ARRs:

Unable to communicate with nzbget. Unable to connect to NzbGet. Error: ConnectFailure (Connection refused): 'http://nzbget:6789/jsonrpc'
Post automatically merged:

In the end just remade the whole thing from scratch and redownloaded nzbs... all working now. No idea what went on with the backup, but there we go
 
Last edited:
  • Like
Reactions: Armin

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Similar threads